Wynns Supreme Engine Flush

Wynn’s Supreme Engine Flush is a pre-oil change motor flush that internally cleans vital engine parts, removing harmful deposits, sludge and varnish that impede oil flow. Wynn's Supreme Engine Flush is specially designed to gently dissolve and remove internal engine contaminants by suspending them in a high level of dispersants. This assures maximum drainage of the contaminants with the used oil, thereby minimizing new oil contamination.

Introduction

Oil breaks down from chemical changes and mechanical stress that occur as mileage is put on a vehicle. Additives present in all motor oils are depleted in service. The oil oxidizes. Varnish and sludge deposits accumulate on vital engine parts and can interfere with smooth operation.

Typical do-it-yourself five minute motor flushes are mostly solvent-types that dilute engine oil so it will drain out faster. If a vehicle is driven before changing the oil or the flush is left in too long, the oil's lubrication ability can be reduced. This same type of solvent may not affect varnish and sludge that has accumulated on engine surfaces. The new oil may be contaminated by the deposits left behind.

Today, high speed, high compression engines and especially those with emission control, run hotter. To offset this, motor oils have been compounded to have increased dirt removing properties. Motor oils with good detergent properties, collect dirt from all parts of the engine and dust that enters the breather, and this dirt is held in suspension in the oil. As this dirt accumulates and detergent failure occurs, little lumps become big lumps and gooey sludge which is called engine mayonnaise, forms. This sludge combines with the resins, gums and lacquers (which result from the oxidation of lubricants) and the acids which are formed as the by-products of fuel combustion.

• 410-550 liters of water
• 13-45 liters of unburned petrol
• 220-900 grams of sludge
• 110-450 grams of varnishes and resins
• 170-280 grams of insoluble salts

Under conditions of high temperatures, all of this foreign material becomes baked on to the moving parts of the engine, and only part of it is removed when the oil is drained. When the oil is changed, the new oil is already dirty before the motor drives out of the service station.

Unless all dirt is completely removed from the engine, the volume which can accumulate after months or years of driving becomes almost unbelievable. Although some auto Manufacturers are recommending extended drain intervals; the fact is that motor oils alone are unable to remove the amount of dirt that can accumulate in 8,000-10,000kms. There is now a great need for an engine on a prolonged drain schedule to be flushed at the time of each change.

Advantages

Wynn's Supreme Engine Flush is a premium formula that safely cleans and prepares the crankcase for the addition of clean oil. Wynn's Supreme Engine Flush contains no harsh solvents or alcohols as do many motor flushes. This special formula helps suspend and remove sludge and varnish deposits from vital engine parts. Wynn's Supreme Engine Flush is formulated with the same detergents, dispersants and anti-wear additives as motor oil, so the engine still has lubrication protection during cleansing. It's even safe to drive before draining.

• Provides controlled dissolving and removal of crankcase deposits from the top down, and helps provide optimum engine lubrication and performance by removing soft deposits from critical areas.
• Dissolves and thins highly oxidized oil, allowing a more complete removal of the used oil, thereby reducing the contamination of the new oil.
• Helps reduce oil consumption problems resulting from blocked or restricted cylinder head oil drain return holes.
• Assists in removing crankcase contaminants and holds them in suspension so that they can be drained with the used oil.
• Helps assure optimum engine life by reducing the accumulation of deposits which can block oil lines and screens and restrict proper lubrication of engine components.
• Assures proper valve train and oil pump operation by removing deposits in these areas, thereby helping to ensure engine efficiency.
• Removes and suspends low temperature sludge deposits.
• Conditions the metal surfaces to provide additional anti-wear protection from metal-to-metal contact during the cleaning operation and in preparation for the new oil.
• Formulated with the unique Wynn's Friction Proofing package which protects internal engine parts and reduces friction during the cleaning process prior to the addition of the new oil.

Key Benefits

• Contains effective concentrated cleaners that remove sludge and varnish.
• Restores engine compression and performance.
• Suspends and removes deposits for improved lubrication.
• Protects metal parts from harmful contaminants between oil changes.
• Contains no harmful solvents, acids or alcohols.
• Cleans build-up from oil lines.
• Formulated with the unique Wynn's Friction Proofing.
• Maintains oil protection.
• Helps maintain oil specifications.
• Promotes a more complete draining of used oil.
• Assures engine efficiency.
• Reduces oil consumption resulting from blocked oil drain return holes.
• Dissolves old highly oxidized oil.
• Reduces new oil contamination.
• Cleans in one application.

Features

• Contains effective concentrated cleaners that remove sludge and varnish.
• Restores engine compression and performance.
• Suspends and removes deposits for improved lubrication.
• Protects metal parts from harmful contaminants between oil changes.
• Contains no harmful solvents, acids or alcohols.
• Cleans build-up from oil lines.
• Formulated with the unique Wynn's Friction Proofing.
• Maintains oil protection.
• Helps maintain oil specifications.
• Promotes a more complete draining of used oil.
• Assures engine efficiency.
• Reduces oil consumption resulting from blocked oil drain return holes.
• Dissolves old highly oxidized oil.
• Reduces new oil contamination.
• Cleans in one application.

Technical Data

Materials Safety Data Sheet SUPREME ENGINE FLUSH Wynn's Australia Pty Ltd. An (ITW), Illinois Tool Works Company .ABN 73 000 370 150 100 Hassall Street, Wetherill Park N.S.W. 2164 Private Bag 35, Wetherill Park DC N.S.W. 2164 TELEPHONE NUMBER: (02) 9828 0900 PRODUCT IDENTIFICATION Product Name Wynn's Supreme Engine Flush Other Names 51406 350 ml Recommended Use Cleaning fluid for engines Supplier Name Wynn's Australia Pty Ltd An (ITW), Illinois Tool Works Company ABN 73 000 370 150 Address 100 Hassall Street, Wetherill Park N.S.W. 2164 Private Bag 35, Wetherill Park DC N.S.W. 2164 Telephone Number (02) 9828 0900 Email : wynnsaus@wynns.net Website : www.wynns.net Emergency Phone Number (02) 9828 0900 Monday-Friday 8.00am - 5.00pm 13 11 26 (24 hours Australia) Poisons Information Centre (PIC) 0800 764 766 (New Zealand) Poisons Information Centre (PIC) HAZARDS IDENTIFICATION Hazard Classification HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. Classified as hazardous according to the criteria of NOHSC. Not classified as a Dangerous Good according to the criteria of the ADG Code. Risk Phrase R 21 Harmful in contact with skin. Safety Phrase S 45 In case of accident or if you feel unwell, seek medical advice immediately COMPOSITION/INFORMATION ON INGREDIENTS Pure substances : Not applicable - Mixture Mixture Chemical Identity CAS Number Proportion Solvent refined light naphthenic mineral oil. 64741-97-5 >60% Other non-hazardous ingredients - < 10% FIRST AID MEASURES Ingestion If swallowed, do NOT induce vomiting. Immediately wash out mouth with water, and then give plenty of water to drink. Seek medical attention. Skin If skin contact occurs, remove contaminated clothing, and flush skin with running water. Wash affected area with soap. If irritation persists, call for medical help. Eye If in eyes, hold eyelids apart and flush the eye continuously with running water. If irritation persists, call for medical help. Inhalation Remove person to fresh air to avoid further inhalation. First Aid Facilities Eyewash station. Advice to Doctor Treatment should be controlled by symptoms and clinical conditions. Emesis may be induced under medical supervision. FIRE FIGHTING MEASURES Suitable Extinguishing Media Dry chemicals, carbon dioxide, water fog, foam. Hazards From Combustion Products Thermal decomposition may produce oxides of carbon, sulphur, nitrogen, phosphorus, zinc and sodium. Precautions For Fire Fighters Use water to cool fire-exposed containers. Combustion will produce smoke and toxic fumes. Special Protective Equipment Fire fighters to use a self contained breathing apparatus. Hazchem Code None allocated ACCIDENTAL RELEASE MEASURES Emergency Procedures Contain spill which may be slippery. Remove all sources of ignition. Increase ventilation. Methods and Materials for Containment and Clean Up Procedures Use absorbent sand, clay or vermiculite. Shovel into containers. Prevent liquid from entering into sewers and waterways. Dispose of in accordance with Federal, State and Local regulations. HANDLING AND STORAGE Precautions for Safe Handling Keep containers closed. Keep out of reach of children. Avoid skin and eye contact. Conditions for Safe Storage Store in cool, well ventilated area. Combustible. Avoid heat, open flame and strong oxidising agents EXPOSURE CONTROLS/PERSONAL PROTECTION National Exposure Standards Name ES-TWA ES-STEL ES-Peak None established for product - - - Established for ingredients. Mineral Oil Mist 5 mg/m3 10 mg/m3   Alternative Standards Petroleum Oil Mist OSHA (PEL) 5mg/m3 ACGIH (TLV-TWA) 5mg/m3 Exposure Standard means the average concentration of a particular substance in the worker's breathing zone, exposure to which, according to current knowledge, should not cause adverse health effects nor cause undue discomfort to nearly all workers. Biological Limit Values No biological limit allocated Engineering Controls For normal use, no ventilation is required. Use in a normal ventilated area. Personal Protective Equipment Respiratory Protection For normal use, none required. Eye / Face Protection Safety glasses. Skin Protection PVC or Nitrile gloves. Rubber, plastic gloves. Thermal Hazards None allocated. PHYSICAL AND CHEMICAL PROPERTIES Appearance Clear thin amber liquid Odour Mild petroleum pH Value Not applicable Vapour Pressure Not applicable Vapour Density > 1 (air = 1) @ 20°C Boiling Point/Range >193°C Freezing Point -23°C Melting Point Not applicable Solubility Nil in water Density 0.901 @ 15°C Flash Point 165°C (COC) Flammable Limits Not available Ignition Temperature Not available Viscosity 12.0 cSt @ 40°C STABILITY AND REACTIVITY Chemical Stability Stable Conditions to Avoid Heat, open flame. Incompatible Materials Strong oxidising agents. Hazardous Decomposition Products Thermal decomposition may produce oxides of carbon, sulphur, nitrogen, phosphorus, zinc and sodium. Hazardous Reactions Polymerization will not occur. TOXICOLOGICAL INFORMATION Toxicology Information This material has not been identified as a carcinogen by NTP, IARC OR OSHA. Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1920.1000(z) and 29 CFR 1910.1200. Acute Health Effects Ingestion If swallowed, may cause slight irritation to digestive tract. Signs and symptoms are discomfort, nausea, vomiting. Inhalation Vapours generated at elevated temperatures can cause irritation to respiratory tract. Eye Will cause irritation to the eyes on direct contact, symptoms include redness and blurred vision. Skin May absorb on prolonged contact. Can cause irritation to skin. Prolonged contact causes redness, defatting of skin to sensitive individuals. Chronic Health Effects Skin Prolonged and repeated contact with skin, will cause skin irritation, defatting of skin and redness ECOLOGICAL INFORMATION Ecotoxicity No ecotoxicological classifications. Persistence/ Degradability This product is inherently biodegradable. Mobility Not available. DISPOSAL CONSIDERATIONS Disposal Methods Dispose of waste according to Federal, EPA, State and Local regulations. Assure conformity with all applicable regulations. Special Precautions for Landfill or Incineration Material suitable for disposal by incineration or landfill through an approved agent. TRANSPORT INFORMATION UN Number None allocated. Proper Shipping Name Not applicable. Class and Subsidiary Risk Not applicable. Packing Group Not applicable. Special Precautions for User None applicable. Hazchem Code None allocated. REGULATORY INFORMATION Poisons Schedule None scheduled. Hazard Category Harmful / NOHSC : 10005 (1999). OTHER INFORMATION Acronyms ABN Australian Business Number ACGIH American Conference of Governmental Industrial Hygienists ADG Australian Dangerous Goods AICS Australian Inventory of Chemical Substances AS Australian Standard CAS Chemical Abstracts Service (USA) COC Cleveland Open Cup EPA Environment Protection Agency (Australian States) IARC International Agency for Research on Cancer IP Institute of Petroleum (UK) NIOSH National Institute for Occupational Safety and Health (USA) NOHSC National Occupational Health and Safety Commission (Australia) NTP National Toxicology Program (USA) NZS New Zealand Standard OSHA Occupational Safety and Health Administration (USA) PEL Permissible Exposure Level PMCC Pensky - Martens Closed Cup SCBA Self-Contained Breathing Apparatus STEL Short Term Exposure Limit SUSDP Standard for the Uniform Scheduling of Drugs and Poisons (Australia) TLV Threshold Limit Valve TWA Time Weighted Average UN United Nations Abbreviations cP centiPoise cSt centiStoke g gram Hg Mercury kPa kiloPascal L litre m3 cubic metre mg milligram mL millilitre mm millimetre ºC degrees of temperature in Celsius (Centigrade) % percent(age) Note This form has been prepared in accordance with the National Code of Practice for the Preparation of Material Safety Data Sheets 2nd Edition [NOHSC:2011 (2003)] issued by the National Occupation Health and Safety Commission April 2003. All information contained in this form is as accurate as possible at the time of issue. The data contained herein is not to be taken as an expressed or implied warranty or representation, for which Wynn's Australia Pty Ltd assumes legal responsibility. No responsibility for damages resulting from use of the information are given, other than those implied mandatorily by Federal or State Government Legislation.