Wynns Power Charge

Wynn's Power Charge contains unique patented technology, combining advanced engine power boosters with effective fuel system detergents and dispersants. Using Wynn's patented technology, Wynn's Power Charge is formulated to increase power and improve fuel economy while lowering tailpipe emissions. Wynn's Power Charge will also eliminate hesitation and knocking by removing fuel deposit buildup.

For the gas tank:

• Provides corrosion protection.
• Eliminates problems from water-contaminated fuel.

THE PROBLEM

Today's automobiles are marvels of modern science and engineering. They deliver more power and torque than cars of yesteryear, sometimes with half of the engine displacement. They do this while producing significantly lower emissions and providing longer life. Needless to say, these cars operate within very narrow windows of ignition timing, air/fuel ratio and other parameters. Small disruptions, such as those caused by fuel system deposits, can result in progressive and sometimes severe problems. These can include power loss, a reduction in mileage; drive-ability upset, and increased emissions.

THE SOLUTION

Wynn's Power Charge Fuel Treatment contains Wynn's unique patented technology, combining advanced engine power boosters with effective fuel system detergents and dispersants. Using Wynn's patented technology, Power Charge Fuel Treatment is formulated to increase power and improve fuel economy while lowering tailpipe emissions. Power Charge will also eliminate hesitation and knocking by removing fuel deposit buildup. When added as directed to the fuel tank of a new or used vehicle, the driver notices the immediate benefit of increased power and fuel economy.
Power Charge Fuel Treatment works in the fuel system as a catalyst to aid the effective combustion of fuel. It also cleans injectors, intake valves and combustion chambers of harmful, power robbing deposits. Wynn's Power Charge Fuel Treatment is formulated to treat 10 to 20 gallons of gasoline or diesel fuel. Use Power Charge Fuel Treatment every 3000 to 4000 miles or with every oil change to keep your customers' vehicles free from fuel system and combustion chamber deposits. Below is an example of a clean intake valve, allowing maximum drive-ability and fuel economy with minimum emissions.

Features

• Improve horsepower, fuel economy and Drive-ability by providing a cleaner fuel system.
• Contain state of the art polyether amine deposit control additive technology.
• Contain a patented combustion catalyst to increase power and reduce emissions.
• Remove deposits on injectors, intake valves and in combustion chambers in the first tank-full.
• Reduce a vehicle's demand for octane by up to 3 numbers.
• Eliminate "rotten egg" odors.
• Reduce particulate emissions in diesels.

Materials Safety Data Sheet Wynn's Professional Products Power Charge WYNN'S A division of Illinois Tool Works Inc. 1151 West Fifth Street Azusa, California 91702 EMERGENCY TELEPHONE NUMBER: Chemtrec (800) 424-9300 INFORMATION TELEPHONE NUMBER: Wynn's (626) 334-0231 PRODUCT IDENTIFICATION PRODUCT NAME EFFECTIVE DATE PRODUCT CODE Wynn's Professional Products Power Charge® Fuel Treatment 3-9-06 66201, 66202 CHEMICAL NAME CAS NUMBER N/A N/A HAZARDOUS INGREDIENTS COMMON NAME CHEMICAL NAME CAS NO. % OSHA PEL ACGIH TLV-TWA Aromatic Solvent Light aromatic solvent naphtha 64742-95-6 Not Established Not Established Petroleum Hydrocarbon Hydrotreated light distillates 64742-88-7 Not Established Not Established DTBP Di-tert-butyl Peroxide 110-05-4 Not Established Not Established Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1910.1000(z) and 29CFR 1910.1200. PHYSICAL DATA These data are approximate or typical values and should not be used as precise specifications. Unless otherwise noted values are at 20°C(68°F) and 760 mmHg (1 atm). Boiling Point/Range 230-530°F (110-277°C) Freeze Point N/D Specific Gravity (H20=1) @ 15.6°C 0.84 Vapor Pressure (mm Hg) > 1 Vapor Density (Air =1) >1 Solubility in Water (%) 0-10% emulsible % Volatiles by Volume N/D Evaporation Rate (Butyl Acetate = 1) >1 pH (as is) N/D pH (dilute) @ % N/A Appearance Clear straw color liquid Odor Petroleum solvent odor N/D - Not Determined < = Less Than N/A - Not Applicable > = Greater Than FIRE AND EXPLOSION HAZARD DATA Flash Point 112°F(44°C) Method Pensky - Martens Closed Cup ASTM D-93 Hazard Class Identification Flammability 2 Health 2 Reactivity 0 Other - Hazard Code 0 - Least (insignificant) 1 - Slight 2 - Moderate 3 - High 4 - Extreme Extinguishing Media Dry chemicals, carbon dioxide, foam, water fog. Special Fire Fighting Procedures Do not enter fire area without proper protection including breathing apparatus. Stay at safe distance. Use water spray to cool fire exposed containers. Unusual Fire and Explosion Hazards Combustion may produce smoke, toxic fumes. REACTIVITY DATA Stability Stable. Conditions to Avoid Sources of ignition such as heat, flames, sparks, etc. Materials to Avoid Acids, strong oxidizing agents such as nitrates. Hazardous Decomposition or Combustion Products Thermal decomposition may produce carbon dioxide, carbon monoxide and oxides of nitrogen. Hazardous Polymerization (conditions) Polymerization will not occur. HEALTH HAZARDS/ROUTES OF ENTRY Signs, Symptoms and Effects of Overexposure Ingestion (swallowing) May be harmful or fatal if swallowed. Due to its low viscosity, it may enter lungs during swallowing or vomiting. Once in lungs serious damage may occur. Skin Contact Can cause skin irritation, defatting of skin, redness. Eye Contact Eye irritant. Inhalation (breathing) May irritate nose, throat, and lungs. Prolonged or repeated exposure to vapor may cause headache, dizziness, nausea, weakness and loss of coordination. Other Effects of Prolonged/Repeated Overexposure This material has not been identified as a carcinogen by NTP, IARC or OSHA. Above effects may be aggravated with repeated overexposure. EMERGENCY AND FIRST AID PROCEDURES Ingestion (swallowing) DO NOT induce vomiting. Call physician immediately Skin Contact Remove all contaminated clothing. Wash thoroughly with soap and water. If signs of irritation develop, seek medical attention. Eye Contact Remove any contact lens. Flush with clean water for 15 minutes. If irritation develops or persists, call a physician. Inhalation (breathing) Remove person to fresh air. Call a physician if unconscious and for symptoms described above. Comments NOTE TO PHYSICIANS: Ingestion or subsequent vomiting can result in aspiration of light hydrocarbon liquid into the lungs which can cause pneumonitis SPILL OR RELEASE CONTROL PROCEDURES Steps to be taken in case material is released or spilled Eliminate all sources of ignition. Isolate and contain material, restrict entry to area. Insure adequate ventilation and absorb with appropriate inert materials. Place absorbed material into waste containers. Waste Disposal Method Dispose of in accordance with Federal, State and Local regulations. ENVIRONMENTAL HAZARD (EPA-CWA, SECTION 311) Spills of this material leading to surface waters where it will cause a sheen must be reported to the National Response Center, (800) 424-8802. This material is toxic to aquatic organisms and should be kept from sewage and drainage systems and all bodies of water. EPA REPORTABLE QUANTITY (RQ), 40CFR302(CERCLA 104) N/A EPA Toxic Chemical Release Reporting, 40CFR372(SARA313) Chemical CAS NO. % in Product N/A N/A N/A HANDLING AND STORAGE Handling and Storage Precautions Warning: Contains combustible petroleum distillates. Avoid skin contact and breathing of vapors USE ONLY IN A WELL VENTILATED AREA. Keep container closed. Keep away from flame, sparks or hot surfaces. Other Precautions Use entire contents. DO NOT store opened containers. Keep out of reach of children. PERSONAL PROTECTION - EXPOSURE CONTROL Ventilation Provide adequate general or local ventilation to maintain concentrations below TLV/PEL limits. Respiratory Protection None normally required. If vapors exceed TLV/PEL values, use a NIOSH approved respirator. Eye Protection Safety glasses. Protective Gloves Chemical-resistant gloves. Other Protective Clothing or Equipment Eye wash station is recommended. . Work/Hygienic Practices Personal cleanliness is always appropriate. Frequent washing minimizes chances of inadvertent exposure. TRANSPORTATION INFORMATION Department of Transportation (DOT) Classification   Flammable Liquid   Corrosive   Flammable Solid   Non Flammable Gas   Flammable Gas   Non Hazardous by DOT Combustible Liquid   Other DOT Proper Shipping Name N/A (Not regulated in quantities less than 119 gallons per container) Air (IATA) and Ocean (IMDG) Shipments Flammable liquid, N.O.S. (Contains Aromatic Solvent), 3, UN1993, PGIII DOCUMENTATION Product Code No.: 66201, 66202 Previous Code No.: 66201, 66202 Issue Date: 03-09-06 Prior Date: 12-29-05 This information is, to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.