Garralube 909

Increased lubricity from penetrating metallic components results in:
  • Friction and wear reduction
  • Reduce engine leakage
  • Affinity for metals
  • Easier starting
  • Quieter engine operation
  • Cleans crankcase of sludge and varnish
  • Minimize deposit of combustion products
  • Inhibits rust
  • Wet-out dried up seals and gaskets
  • Reduce oil consumption
  • Longer bearing and ring life
  • Increase engine life
  • Greater fuel economy


Packaging

5 Litres, 20 Litres

GarraLube 909 Superior Engine Oil Additive

GarraLube 909 Superior Engine Oil Additive Additive is a superior oil additive designed to treat gasoline engines or diesel engines. It is an oil soluble polymer viscosity index improver for use as a supplement in lubricating oil.

GarraLube 909 Superior Engine Oil Additive Additive will increase oil pressure without increasing carbon residue, reduce oil consumption, reduce engine wear, retard oil leakage and has good shear stability.

Key Benefits

  • Reduce oil consumption
  • Longer bearing and ring life
  • Increase engine life
  • Greater fuel economy

Features

Increased lubricity from penetrating metallic components results in:
  • Friction and wear reduction
  • Reduce engine leakage
  • Affinity for metals
  • Easier starting
  • Quieter engine operation
  • Cleans crankcase of sludge and varnish
  • Minimize deposit of combustion products
  • Inhibits rust
  • Wet-out dried up seals and gaskets
  • Reduce oil consumption
  • Longer bearing and ring life
  • Increase engine life
  • Greater fuel economy

Application

Treat level should be 5 % GarraLube 909 Superior Engine Oil Additive to the entire crankcase oil capacity or 1 part GarraLube 909 Engine Oil Additive to 20 parts engine oil (1 : 20)

GarraLube 909 Superior Engine Oil Additive should be added to warm engine. The engine must be started immediately after the correct treat level is applied. The engine must be kept running for 20 minutes to activate and accelerate the coating process. Best results are achieved if treatment is done shortly after an oil and oil-filter change.
Leave GarraLube 909 Superior Engine Oil Additive in the engine until the next scheduled oil change as required by the manufacturer.

GarrLube 909 Superior Engine Oil Additive is compatible with all mineral-based motor oils and all synthetic-based motor oils.

APPLICATION MIXING RATIO
For use in greater than 200 Liters of engine oil 1 : 100 (1%)
For use in 200 Liters or less of engine oil 1 : 40 (2.5%)


Technical Data

TYPICAL ANALYSIS
Viscosity @ 40°C, cSt 14,000
Viscosity @ 100°C, cSt 1.000
Viscosity @ 100°C, SUS 73.000
Viscosity @ 210°C, SUS 4.845
Viscosity Index 288
Flash Point, °F 400
Pour Point, °F 20
Specific Gravity 0.8586
API Gravity 33.0
Color Visual Amber

Materials Safety Data Sheet

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT: GARRALUBE 909 SUPERIOR ENGINE OIL ADDITIVE
PRODUCT DESCRIPTION: Viscosity Modifier
PRODUCT CODE: 909
INTENDED USE: Viscosity improver for lubricant oil
COMPANY IDENTIFICATION:
PT GAPURA RAYA
Jl. Bangka Raya No. 4, Pela Mampang
Jakarta 12720, Indonesia
Phone : (62-21) 7179 0740


SECTION 2: MATERIAL IDENTIFICATION AND INFORMATION

COMPONENT CAST NUMBER TLV/PEL (mg/M3) WEIGHT %
PETROLEUM OIL 64742-52-5 10 (AS OIL MIST) 80 - 90
PROPRIETARY ADDITIVES MIXTURE NE 10 - 20

The specific chemical names and composition of the components not disclosed is confidential business information and is withheld as permitted by 29CFR 1910.1200 and various state Right-to-Know laws.

This material is not known to contain any chemical listed as a carcinogen or suspected carcinogen by OSHA Hazard Communication Standard 29CFR 1910.1200, IARC, or the National Toxicology Program (NTP) at a concentration greater than 0.1%.



SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES

Typical physical and chemical properties are given below. Consult the Supplier in Section 1 for additional data.

GENERAL INFORMATION
Physical State: Pale yellow Liquid
Color: light yellow
Odor: Slight petroleum odor
Odor Threshold: None

MPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION
Relative Density (at 15 C): 0.859
Flashpoint (Cleveland Open Cup): 400F ( 204C )
Flammable Limits (Approximate volume% in Air): LEL: NA UEL: NA
Autoignition Temperature: NA
Boiling Point / Range: NE
Vapor Density (Air = 1): < 1 mm
Vapor Pressure, mmHg at 25C: < 1 mm
Evaporation Rate (n-butyl acetate = 1): NE
pH: NE
Log Pow (n-Octanol/Water Partition Coefficient): NE
Solubility in Water: Slight
Viscosity: NE
Oxidizing Properties: See Section 3, 15, 16.

OTHER INFORMATION
Freezing Point: NE
Melting Point: NE
Pour Point: NE
DMSO Extract (mineral oil only), IP-346: NE


SECTION 4: FIRE AND EXPLOSION DATA

Flashpoint (Cleveland Open Cup): 500F
Autoignition Temperature: NE
Flammable Limits: NE
Fire Extinguishing Agents: Water Spray (fog), dry chemical, foam, halon, or carbon dioxide. Water stream may splash burning liquid and spread fire.
Special Fire Fighting Procedures: As for petroleum products. Do not use direct or heavy water stream to fight fire. Use self-contained breathing apparatus to fight fires.


SECTION 5: FIRST AID

Contact with EYES: Immediately flush with large quantities of cool water for at least 15 minutes. Get medical attention.
Contact with SKIN: Toxicity (Rabbit): LD50 > 2000 mg/kg. Minimally Toxic. Based on review of components.
Inhalation: Toxicity (Rat): LC 50 > 5000 mg/m3. Minimally Toxic. Based on review of components.
Ingestion: Toxicity (Rat): LC 50 > 2000 mg/kg. Minimally Toxic. Based on review of components.
Reactivity: Stable under normal temperatures and pressures.
Incompatibilities: Strong oxidizing agents, heat, open flame.
Hazardous Polymerization: Des not occur.


SECTION 6: SPECIAL PROTECTION INFORMATION

Ventilation (Local, Mechanical, Special): Use in a well ventilated area with local exhaust ventilation.
Respiratory Protection: None required in normal use. Use only NIOSH/MSHA Organic vapor approved equipment if necessary.
Gloves: Not required in normal use.
Eye Protection: Goggles or safety glasses are recommended.
Other Protective Equipment: Practice good personal hygiene. Wash hands after use and handling.


SECTION 7: ENVIRONMENTAL PROCEDURES

Spills or Leaks: Contain any spills with absorbents to prevent migrations and entry into sewers or streams. Take up small spills with dry chemical absorbent. Large spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil.
Waste Disposal: To the best of Gapura Raya knowledge this product is not regulated by CERCLA/RCRA as a hazardous waste or material. However, this product has not been tested for the toxicity characteristic via the Toxicity Characteristic Leaching Procedure. Therefore, it may be disposed of as an industrial waste in a manner acceptable to good waste management practice and in compliance wit applicable local, state, and federal regulations.
Right-to-Know: None
TSCA: This material is in compliance with the Toxic Substances Control Act (15USC2601-2629)


SECTION 8: STORAGE AND HANDLING

Keep containers sealed until ready for use. Avoid excessive long-term storage temperatures to prolong shelf life. Maximum storage temperature: 120F. Store in well ventilated areas.



SECTION 9: TRANSPORT

D.O.T. Shipping Name: Not Regulated
D.O.T. I.D. Number: NA
Reportable Quantity: NA
Freight Classification: NA
UN Hazard Class: NA
Special Transportation Notes: None

Notes:
NA = Not Applicable NE = Not Established
NE = Not Established, ND = Not Determined, NA = Not Applicable

THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:
No Revision information is available.
Revision Date: August 28th, 2010
Supersedes: Any previous versions
Prepared by: Robert Darmago

PT GAPURA RAYA. believes that the information and recommendations contained herein (including data and statements) are accurate as of the date hereof.

No warranty of fitness, warranty of merchantability or any other warranty, expressed or implied, is made concerning the information provided herein.

The information provided herein relates only to the specific product designated and may not be valid where such product is used in combination with any other materials or process.

Further, since the conditions and methods of use of this product and of the information referred to herein are beyond the control of PT GAPURA RAYA.

PT GAPURA RAYA. expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information.